# 6 frame Flow Hive 2 Cedar leg spacing and rubber feet diameter needed **URL:** \ **Category:** Modifications & Building Bee Hives\ **Created:** [May 22, 2023, 10:26am UTC](https://forum.honeyflow.com/t/6-frame-flow-hive-2-cedar-leg-spacing-and-rubber-feet-diameter-needed/34917 "2023-05-22T10:26:03Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![purge98](https://avatars.discourse-cdn.com/v4/letter/p/48db29/32.png) [@purge98](https://forum.honeyflow.com/u/purge98)\ **Post date:** [May 22, 2023, 10:26am UTC](https://forum.honeyflow.com/t/6-frame-flow-hive-2-cedar-leg-spacing-and-rubber-feet-diameter-needed/34917/1 "2023-05-22T10:26:03Z")
Hi, I’m designing a hive weight scale for my flow hive and am not at home. I was wondering if anyone knows the diameter of the rubber feet and the spacing of them from front to rear and left to right? I am referring to the threaded type feet and would like the distance from the centre of the threaded rods. I need to buy C channel aluminium and build it before returning back home to fit it. Thanks ---
**Author:** ![Balubabalu](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/balubabalu/32/28433_2.png) [@Balubabalu](https://forum.honeyflow.com/u/Balubabalu)\ **Post date:** [May 26, 2023, 12:30pm UTC](https://forum.honeyflow.com/t/6-frame-flow-hive-2-cedar-leg-spacing-and-rubber-feet-diameter-needed/34917/2 "2023-05-26T12:30:10Z")
May I suggest to ask the Honey Flow Team [info@honeyflow.com](mailto:info@honeyflow.com) support directly and report back? 🙂 Also, please post your design. I’ve been thinking about something like that myself. ---
**Author:** ![purge98](https://avatars.discourse-cdn.com/v4/letter/p/48db29/32.png) [@purge98](https://forum.honeyflow.com/u/purge98)\ **Post date:** [May 26, 2023, 12:50pm UTC](https://forum.honeyflow.com/t/6-frame-flow-hive-2-cedar-leg-spacing-and-rubber-feet-diameter-needed/34917/3 "2023-05-26T12:50:59Z")
Thanks for the tip. I’ll ask them. I am going to use these [https://a.aliexpress.com/\_m0dYhZO](https://a.aliexpress.com/_m0dYhZO) connected to an Arduino Pro mini and bolted to C channel aluminium and put under the flow hive legs. All powered by a solar panel. ---
**Author:** ![Balubabalu](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/balubabalu/32/28433_2.png) [@Balubabalu](https://forum.honeyflow.com/u/Balubabalu)\ **Post date:** [May 29, 2023, 8:47pm UTC](https://forum.honeyflow.com/t/6-frame-flow-hive-2-cedar-leg-spacing-and-rubber-feet-diameter-needed/34917/4 "2023-05-29T20:47:37Z")
Interesting. Most “professional” hive scales I’ve seen seem to use beam style load cells. Please keep us posted on the build 🙂.