# Bees between the bottom screen and the pull out board

**URL:** <https://forum.honeyflow.com/t/bees-between-the-bottom-screen-and-the-pull-out-board/5605>\
**Category:** Flow Hive\
**Created:** [March 8, 2016, 9:02pm UTC](https://forum.honeyflow.com/t/bees-between-the-bottom-screen-and-the-pull-out-board/5605 "2016-03-08T21:02:53Z")\
**Posts on this page:** 1\
**Showing post:** 22

<div class="post-metadata">

**Author:** ![Dawn\_SD](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/dawn_sd/32/15954_2.png) [@Dawn\_SD](https://forum.honeyflow.com/u/Dawn_SD)\
**Post date:** [March 9, 2016, 10:02pm UTC](https://forum.honeyflow.com/t/bees-between-the-bottom-screen-and-the-pull-out-board/5605/22 "2016-03-09T22:02:21Z")

</div>

I understand what you are saying Matt, but just to add some info, here is a photo of the whole SBB before I moved the wires to even out the mesh. The widest points were over 6mm, some close to 7mm. I think that may become an issue to Flow customers.  
 ![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex016/uploads/honeyflow/original/2X/8/87ec2b06f9ae06f9097ab698e0a7096a38f8d6bb.jpg)  
Now I have fixed the spacing, the mesh looks OK, but I actually fixed it before I realized it was #6 mesh. I can see Flow’s reasoning, but I really think it is worth reconsidering, I am delighted that you are going to discuss it with Cedar.

By comparison, there is no distortion in my Bee Thinking SBBs’ mesh - I am very happy with them.

---

_[View the full topic](https://forum.honeyflow.com/t/bees-between-the-bottom-screen-and-the-pull-out-board/5605)._
