# Bees between the bottom screen and the pull out board

**URL:** <https://forum.honeyflow.com/t/bees-between-the-bottom-screen-and-the-pull-out-board/5605>\
**Category:** Flow Hive\
**Created:** [March 8, 2016, 9:02pm UTC](https://forum.honeyflow.com/t/bees-between-the-bottom-screen-and-the-pull-out-board/5605 "2016-03-08T21:02:53Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Dawn\_SD](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/dawn_sd/32/15954_2.png) [@Dawn\_SD](https://forum.honeyflow.com/u/Dawn_SD)\
**Post date:** [March 9, 2016, 12:24am UTC](https://forum.honeyflow.com/t/bees-between-the-bottom-screen-and-the-pull-out-board/5605/7 "2016-03-09T00:24:58Z")

</div>

Now I think this is developing into an important issue. I just got my Flow hive yesterday, and on cursory inspection, everything looked fine. I had a few issues with no pilot holes and curvy rebates/rabbets, but the SBB looked OK to me from a distance. Today, I re-inspected my SBB in full daylight. To my mind, the gaps I see here are NOT bee-proof:  
 ![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex016/uploads/honeyflow/original/2X/9/9c83951958ae9da2e317a5e9e79595c525a9a2fa.jpg)

It might be worth a comment in the instructions to check this before installing bees @Cedar @beethinking

I have some jewelers pliers, and I will repair this myself, but you have to know it can be a problem, so that you can deal with it… 😊

---

_[View the full topic](https://forum.honeyflow.com/t/bees-between-the-bottom-screen-and-the-pull-out-board/5605)._
