# Flow frames set correctly?

**URL:** <https://forum.honeyflow.com/t/flow-frames-set-correctly/26345>\
**Category:** Flow Hive\
**Created:** [June 12, 2020, 1:36pm UTC](https://forum.honeyflow.com/t/flow-frames-set-correctly/26345 "2020-06-12T13:36:31Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Marc1](https://avatars.discourse-cdn.com/v4/letter/m/49beb7/32.png) [@Marc1](https://forum.honeyflow.com/u/Marc1)\
**Post date:** [June 12, 2020, 1:36pm UTC](https://forum.honeyflow.com/t/flow-frames-set-correctly/26345/1 "2020-06-12T13:36:31Z")

</div>

I installed my flow frames yesterday and within minutes had bees on observation windows.  
This morning, some of the bees are inspecting the plastic comb.  
When i looked at the pictures, the comb seems to be split at the ends.  
I did the reset procedure with the flow key and adjusted the screw  
Does the split seem normal or is it a problem  
Thanks for the help as usual!

---

<div class="post-metadata">

**Author:** ![George\_Perth](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/george_perth/32/21207_2.png) [@George\_Perth](https://forum.honeyflow.com/u/George_Perth)\
**Post date:** [June 12, 2020, 1:48pm UTC](https://forum.honeyflow.com/t/flow-frames-set-correctly/26345/2 "2020-06-12T13:48:19Z")

</div>

Hi @Marc1, welcome to the forum  
Does the split seem normal or is it a problem

Can you load a photo of the flow frame, showing the area of concern, that would help  
Cheers, G

---

<div class="post-metadata">

**Author:** ![Peter48](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/peter48/32/14625_2.png) [@Peter48](https://forum.honeyflow.com/u/Peter48)\
**Post date:** [June 12, 2020, 11:21pm UTC](https://forum.honeyflow.com/t/flow-frames-set-correctly/26345/3 "2020-06-12T23:21:55Z")

</div>

If you checked the frame was in the closed position with the key full inserted then all is good, if by accident the frame was in the open position you can’t fit the key cap into the slot. When the frame is closed there is a gap (split) between the two parts of the cell but the bees will close it with wax.  
Cheers

---

<div class="post-metadata">

**Author:** ![Eva](https://avatars.discourse-cdn.com/v4/letter/e/dbc845/32.png) [@Eva](https://forum.honeyflow.com/u/Eva)\
**Post date:** [June 13, 2020, 3:13am UTC](https://forum.honeyflow.com/t/flow-frames-set-correctly/26345/4 "2020-06-13T03:13:09Z")

</div>

[https://www.honeyflow.com/faqs/all/how-to-reset-a-flow-frame/p/353](https://www.honeyflow.com/faqs/all/how-to-reset-a-flow-frame/p/353)

Good pics here, Marc 👍

---

<div class="post-metadata">

**Author:** ![Freebee2](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/freebee2/32/18643_2.png) [@Freebee2](https://forum.honeyflow.com/u/Freebee2)\
**Post date:** [November 20, 2020, 5:35am UTC](https://forum.honeyflow.com/t/flow-frames-set-correctly/26345/5 "2020-11-20T05:35:52Z")

</div>