# Half frame remaing **URL:** \ **Category:** Flow Hive\ **Created:** [May 10, 2017, 8:45pm UTC](https://forum.honeyflow.com/t/half-frame-remaing/11160 "2017-05-10T20:45:59Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![southeyc](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/southeyc/32/10434_2.png) [@southeyc](https://forum.honeyflow.com/u/southeyc)\ **Post date:** [May 10, 2017, 8:46pm UTC](https://forum.honeyflow.com/t/half-frame-remaing/11160/1 "2017-05-10T20:46:00Z")
I have just pulled the last of the honey from my Flow frames to winter my hive. After the flow slowing, I pulled the frames to check them, and noted the back half of the frame was still chokkas with honey. Seems like a malfunction in the way the frames split. Anyone had this issue or got any tips? ---
**Author:** ![Vestigialamentum](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/vestigialamentum/32/9879_2.png) [@Vestigialamentum](https://forum.honeyflow.com/u/Vestigialamentum)\ **Post date:** [May 11, 2017, 5:47am UTC](https://forum.honeyflow.com/t/half-frame-remaing/11160/2 "2017-05-11T05:47:09Z")
Did you push the flow key in all the way? ---
**Author:** ![Dawn\_SD](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/dawn_sd/32/15954_2.png) [@Dawn\_SD](https://forum.honeyflow.com/u/Dawn_SD)\ **Post date:** [May 11, 2017, 7:52am UTC](https://forum.honeyflow.com/t/half-frame-remaing/11160/3 "2017-05-11T07:52:25Z")
> [@southeyc](#): > > Seems like a malfunction in the way the frames split I actually have 2 Flow keys, so I like to put both in at once and turn together to open or close. However, you can achieve the same thing by putting one key into the left, then middle, then right of the channel, turning each time. I have noticed that if I don’t do that, some cells don’t open/close reliably. The Flow online shop sells extra keys now, if you wanted a second one - $15 in the US (but I bet they have them in Australia too), and shipping is not expensive.