# Hive inspection - advice please, Newtown, NSW, Australia **URL:** \ **Category:** Beekeeping - Basics\ **Created:** [December 26, 2018, 11:15pm UTC](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375 "2018-12-26T23:15:03Z")\ **Posts on this page:** 9\ **Page:** 3
**Author:** ![Ropate](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/ropate/32/17111_2.png) [@Ropate](https://forum.honeyflow.com/u/Ropate)\ **Post date:** [January 1, 2019, 11:04pm UTC](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375/41 "2019-01-01T23:04:07Z")
> [@liteceeper](#): > > I also use slatted racks on all my hives Fab, I’ll try the insulation!! The non-diy guy in me wonders whether that would just hold more heat in from the sun on the sides of the hive. As for the slatted racks, forgive the stupidity, but where does that go exactly? Would love to give it a try. > [@Dawn\_SD](#): > > 15cm is sufficient for good ventilation, honest! 😜 Thanks for this! 😁 Will use fly screen on the ends of the entrance to reduce to 15cm. > [@Eva](#): > > Better watch whose parasols you call daggy, Skegs! 😂 ---
**Author:** ![Anon](https://avatars.discourse-cdn.com/v4/letter/a/47e85d/32.png) [@Anon](https://forum.honeyflow.com/u/Anon)\ **Post date:** [January 2, 2019, 1:02am UTC](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375/42 "2019-01-02T01:02:04Z")
I’d feel better seeing eggs or young brood. The one frame of brood is older. ---
**Author:** ![Peter48](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/peter48/32/14625_2.png) [@Peter48](https://forum.honeyflow.com/u/Peter48)\ **Post date:** [January 2, 2019, 5:12am UTC](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375/43 "2019-01-02T05:12:06Z")
I would give as much entrance as available, remove the bamboo stick. You are having heat wave weather and that is your major issue more than anything else at this time of year. Cheers ---
**Author:** ![Peter48](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/peter48/32/14625_2.png) [@Peter48](https://forum.honeyflow.com/u/Peter48)\ **Post date:** [January 2, 2019, 5:15am UTC](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375/44 "2019-01-02T05:15:47Z")
I haven’t seen them in Aussie catalogues or on the net so I doubt they are available here Anthony. Cheers ---
**Author:** ![Ropate](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/ropate/32/17111_2.png) [@Ropate](https://forum.honeyflow.com/u/Ropate)\ **Post date:** [January 2, 2019, 8:57am UTC](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375/45 "2019-01-02T08:57:31Z")
> [@Peter48](#): > > I haven’t seen them in Aussie catalogues or on the net just found one online in the US and will ship to family in New York for them to bring down this month. PErfect timing! ---
**Author:** ![Ropate](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/ropate/32/17111_2.png) [@Ropate](https://forum.honeyflow.com/u/Ropate)\ **Post date:** [January 2, 2019, 9:00am UTC](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375/46 "2019-01-02T09:00:25Z")
> [@Anon](#): > > I’d feel better seeing eggs or young brood. The one frame of brood is older. noted. i will definitely be looking for eggs in the next inspection. saw quite a bit of larvae in the first inspection mentioned, but as i was letting the bee expert do the inspection while i watched I didn’t get a chance to look for eggs. He mentioned that he wasn’t looking for them himself. ---
**Author:** ![Peter48](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/peter48/32/14625_2.png) [@Peter48](https://forum.honeyflow.com/u/Peter48)\ **Post date:** [January 2, 2019, 11:01pm UTC](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375/47 "2019-01-02T23:01:35Z")
An expert would have walked you through an inspection at your pace of understanding what you are seeing. with his mistakes he made he has over rated himself to you. As a thought, in your location it may be worth considering a piece of thin plywood well painted white and adding that on top of the hive. Cut it a good 25cms or more larger than the hive and holding it in place with a brick. That is assuming you have a flat roof on the hive. Sort of as a sun shade, that will make the hive cooler and cut down the bearding. Cheers ---
**Author:** ![liteceeper](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/liteceeper/32/17264_2.png) [@liteceeper](https://forum.honeyflow.com/u/liteceeper)\ **Post date:** [January 3, 2019, 9:13am UTC](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375/48 "2019-01-03T09:13:46Z")
> [@Ropate](#): > > As for the slatted racks, forgive the stupidity, but where does that go exactly? Would love to give it a try. no such thing as a stupid question. The slatted rack sits on the bottom board with the brood box on top, the entrance is at the end with wide slat and is designed to stop wind on front of combs. As @Dawn_SD noted this allows queen to lay to bottom of combs. It’s a bit like a foyer where workers can hang out with out crowding the passages and over heating combs. ---
**Author:** ![Ropate](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/ropate/32/17111_2.png) [@Ropate](https://forum.honeyflow.com/u/Ropate)\ **Post date:** [January 3, 2019, 9:54pm UTC](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375/49 "2019-01-03T21:54:55Z")
> [@liteceeper](#): > > The slatted rack sits on the bottom board I’ve ordered from Mann Lake! It will arrive with my niece in a couple weeks. Until then, I’m going to make a very basic shade cloth cover with some stakes. Seems to be the simplest and cheapest option. > [@Peter48](#): > > That is assuming you have a flat roof I have the flow hive gabled roof, so that won’t work. But started the idea process for the shade cover above. Thanks though. As for the expert… Yes well, he kind of ran through it at his pace and seemed a little nervous. So, not quite at my pace. Lessons learned. [Previous page](https://forum.honeyflow.com/t/hive-inspection-advice-please-newtown-nsw-australia/20375.md?page=2)