# Honey leaking from frames? Due Hot weather? 34C **URL:** \ **Category:** General Bee Chat\ **Created:** [October 14, 2020, 9:42pm UTC](https://forum.honeyflow.com/t/honey-leaking-from-frames-due-hot-weather-34c/27950 "2020-10-14T21:42:47Z")\ **Posts on this page:** 7\ **Page:** 2
**Author:** ![Beaver82](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/beaver82/32/23406_2.png) [@Beaver82](https://forum.honeyflow.com/u/Beaver82)\ **Post date:** [October 15, 2020, 12:22am UTC](https://forum.honeyflow.com/t/honey-leaking-from-frames-due-hot-weather-34c/27950/22 "2020-10-15T00:22:37Z")
Inner hole is closed at the moment ---
**Author:** ![Stevo](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/stevo/32/22434_2.png) [@Stevo](https://forum.honeyflow.com/u/Stevo)\ **Post date:** [October 15, 2020, 12:27am UTC](https://forum.honeyflow.com/t/honey-leaking-from-frames-due-hot-weather-34c/27950/23 "2020-10-15T00:27:26Z")
Cool, I’d keep it that way and vent the gabled section ASAP as those roof cavities are like an oven on a hot day, much like your house. If you do choose to open the inner cover hole I would mesh over it as comb built in the roof will get very messy and complicates inspections. ---
**Author:** ![Eva](https://avatars.discourse-cdn.com/v4/letter/e/dbc845/32.png) [@Eva](https://forum.honeyflow.com/u/Eva)\ **Post date:** [October 15, 2020, 1:40am UTC](https://forum.honeyflow.com/t/honey-leaking-from-frames-due-hot-weather-34c/27950/24 "2020-10-15T01:40:50Z")
Hey Ryan, you have lots to do already 😅 but I wanted to make a suggestion that could give you a lot of juice for a little squeeze, re your original concern - take off the Flow roof, slap a temporary lid on and put a couple coats of white or light colored exterior paint on the Flow roof. ---
**Author:** ![Peter48](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/peter48/32/14625_2.png) [@Peter48](https://forum.honeyflow.com/u/Peter48)\ **Post date:** [October 15, 2020, 6:36am UTC](https://forum.honeyflow.com/t/honey-leaking-from-frames-due-hot-weather-34c/27950/25 "2020-10-15T06:36:56Z")
They are perfect to be used as roof vents in a hive. ---
**Author:** ![Peter48](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/peter48/32/14625_2.png) [@Peter48](https://forum.honeyflow.com/u/Peter48)\ **Post date:** [October 15, 2020, 6:49am UTC](https://forum.honeyflow.com/t/honey-leaking-from-frames-due-hot-weather-34c/27950/26 "2020-10-15T06:49:24Z")
They are the ones I use and don’t find the bees wax them up in Winter either. Open the inner roof hole. You can paint the whole hive during the day except for the front of the brood box, do that after sunset, Plastic paint(water base) will skin in a matter of minutes applied on a hot day and the wood will be hot also. As Steve said put a piece of fly screen over the hole held down with duct tape. Cheers ---
**Author:** ![Beaver82](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/beaver82/32/23406_2.png) [@Beaver82](https://forum.honeyflow.com/u/Beaver82)\ **Post date:** [October 16, 2020, 3:16am UTC](https://forum.honeyflow.com/t/honey-leaking-from-frames-due-hot-weather-34c/27950/27 "2020-10-16T03:16:47Z")
Well… it seems my leaking honey from the frames was not actually leaking honey after all! Soooo the day before I had cleaned out the bug tray, and as I was cleaning it I was a little rough with the tapping on the back that I cracked the bottom a little. Anyway I didn’t think much of it, I decided then to do what Ive have seen others do and put a little vegie oil in the tray. Which I did, and then put the tray back under the brood box. Anyway the stuff leaking out the bottom was just the vegie oil, seeping slowly though the crack I made in the bottom of the tray! So there was no dire crises after all! 🙂 No matter, I still took your advice on a few things. I put up a tarp that shades the hive during the hot afternoon. I ran the over head sprays to see what the bees thought, and it seems they quite enjoyed it. Had a good drink from the droplets on the landing ledge. And wow it really did drop the ambient temp of the area. So today I went to Bunnings & got some white semi-gloss ext paint with which to give the hive a coat. So thanks Pete, Steve & Eva. Its good to know there is a brains trust to consult at a moments notice 🙂 Here are some progress photos from Day of installing the Super… up till yesterday, Day 15. And 1 of the bees hanging out the front of the hive yesterday… ![IMG_3180](https://us1.discourse-cdn.com/flex016/uploads/honeyflow/original/3X/5/7/57d451ba9b0bb5be78d53457af19471b4da7ddac.jpeg) ![Day 1](https://us1.discourse-cdn.com/flex016/uploads/honeyflow/original/3X/5/d/5d0cffa9a8691e4dcdc85bb8d06f3492e7d450d2.jpeg) ![day 3](https://us1.discourse-cdn.com/flex016/uploads/honeyflow/original/3X/b/3/b3645080834bd2198f78d921921e0fdbe7c2b999.jpeg) ![day 7](https://us1.discourse-cdn.com/flex016/uploads/honeyflow/original/3X/c/f/cf10f09be329329de57eec4fb72e66277ad72bde.jpeg) ![day 11](https://us1.discourse-cdn.com/flex016/uploads/honeyflow/original/3X/f/d/fd2b690c35e4119dcbb48a1f7d60d7f23e35494b.jpeg) ![day 13](https://us1.discourse-cdn.com/flex016/uploads/honeyflow/original/3X/b/d/bd73c4cb2c172af126bb8fe25fd19b4014d1d679.jpeg) ![IMG_3171](https://us1.discourse-cdn.com/flex016/uploads/honeyflow/original/3X/1/1/11a835209877e591ed8ebae46e3d5bdca4eb91ed.jpeg) ![IMG_3173](https://us1.discourse-cdn.com/flex016/uploads/honeyflow/original/3X/4/c/4c02c5a30efbe61b1a24a7d8b78b5f833c1a02b5.jpeg) ---
**Author:** ![Eva](https://avatars.discourse-cdn.com/v4/letter/e/dbc845/32.png) [@Eva](https://forum.honeyflow.com/u/Eva)\ **Post date:** [October 16, 2020, 12:56pm UTC](https://forum.honeyflow.com/t/honey-leaking-from-frames-due-hot-weather-34c/27950/28 "2020-10-16T12:56:48Z")
So glad all is well! And wow, look at that super😍 [Previous page](https://forum.honeyflow.com/t/honey-leaking-from-frames-due-hot-weather-34c/27950.md?page=1)