# I am new on this forum!

**URL:** <https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317>\
**Category:** Introductions\
**Tags:** newbee\
**Created:** [August 31, 2021, 9:01am UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317 "2021-08-31T09:01:42Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![zee96](https://avatars.discourse-cdn.com/v4/letter/z/90ced4/32.png) [@zee96](https://forum.honeyflow.com/u/zee96)\
**Post date:** [August 31, 2021, 9:01am UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/1 "2021-08-31T09:01:42Z")

</div>

Hi, How are you everybody. I am new on this forum.

---

<div class="post-metadata">

**Author:** ![Simon\_Dent](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/simon_dent/32/26042_2.png) [@Simon\_Dent](https://forum.honeyflow.com/u/Simon_Dent)\
**Post date:** [August 31, 2021, 12:37pm UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/2 "2021-08-31T12:37:22Z")

</div>

Hi, me too, welcome and enjoy the reading.

---

<div class="post-metadata">

**Author:** ![zee96](https://avatars.discourse-cdn.com/v4/letter/z/90ced4/32.png) [@zee96](https://forum.honeyflow.com/u/zee96)\
**Post date:** [September 1, 2021, 7:01am UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/3 "2021-09-01T07:01:06Z")

</div>

This post was flagged by the community and is temporarily hidden.

---

<div class="post-metadata">

**Author:** ![Greshambeekeeper](https://avatars.discourse-cdn.com/v4/letter/g/ea666f/32.png) [@Greshambeekeeper](https://forum.honeyflow.com/u/Greshambeekeeper)\
**Post date:** [November 2, 2021, 6:41pm UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/4 "2021-11-02T18:41:14Z")

</div>

I notice water in the tray from what I am assuming is condensation in the hive. Temps are in the upper 50s(Fahrenheit) with lows in the 40s. Is this level of moisture okay? I do have a vent hole in the hive cover to help with air flow but am not sure if moisture is more of a problem than conserving warmth.

---

<div class="post-metadata">

**Author:** ![chau06](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/chau06/32/25515_2.png) [@chau06](https://forum.honeyflow.com/u/chau06)\
**Post date:** [November 2, 2021, 7:17pm UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/5 "2021-11-02T19:17:06Z")

</div>

You can flip the tray over to let the water drain away.

---

<div class="post-metadata">

**Author:** ![Greshambeekeeper](https://avatars.discourse-cdn.com/v4/letter/g/ea666f/32.png) [@Greshambeekeeper](https://forum.honeyflow.com/u/Greshambeekeeper)\
**Post date:** [November 2, 2021, 9:57pm UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/6 "2021-11-02T21:57:44Z")

</div>

Good suggestion. I was wondering if in the winter I should just put a flatter tray in to reduce air flow to help keep the hive warmer. My only concern would be reducing air flow and causing more condensation.

---

<div class="post-metadata">

**Author:** ![Dawn\_SD](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/dawn_sd/32/15954_2.png) [@Dawn\_SD](https://forum.honeyflow.com/u/Dawn_SD)\
**Post date:** [November 2, 2021, 10:02pm UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/7 "2021-11-02T22:02:16Z")

</div>

With the FH2 base you can turn the vent cover through 180° vertically to put the area with no slots at the top, IIRC. I don’t mess with mine, so I would have to go and check, but when I built it, that is how it looked to me  
😉

---

<div class="post-metadata">

**Author:** ![Greshambeekeeper](https://avatars.discourse-cdn.com/v4/letter/g/ea666f/32.png) [@Greshambeekeeper](https://forum.honeyflow.com/u/Greshambeekeeper)\
**Post date:** [November 2, 2021, 10:11pm UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/8 "2021-11-02T22:11:31Z")

</div>

I did reverse the vent cover as you suggested, Dawn, which should reduce air flow a bit. I am not sure how much though. Maybe I am worrying too much about them but just hope there isn’t mold forming inside. I didn’t see any on the tray at least.

---

<div class="post-metadata">

**Author:** ![chau06](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/chau06/32/25515_2.png) [@chau06](https://forum.honeyflow.com/u/chau06)\
**Post date:** [November 2, 2021, 11:33pm UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/9 "2021-11-02T23:33:22Z")

</div>

You could also make a skirt to go around the bottom if you’re worried about a draft. But it’s not that cold in Gresham… I wouldn’t worry about it.

There probably may be some mold but the bees will clean it up.

If you haven’t already, you might want to put some insulation over the inner cover to prevent water from condensing directly over the cluster.

---

<div class="post-metadata">

**Author:** ![Greshambeekeeper](https://avatars.discourse-cdn.com/v4/letter/g/ea666f/32.png) [@Greshambeekeeper](https://forum.honeyflow.com/u/Greshambeekeeper)\
**Post date:** [November 3, 2021, 12:13am UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/10 "2021-11-03T00:13:02Z")

</div>

Will do an inner cover to help. Any recommendations on material to use?

---

<div class="post-metadata">

**Author:** ![Dawn\_SD](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/dawn_sd/32/15954_2.png) [@Dawn\_SD](https://forum.honeyflow.com/u/Dawn_SD)\
**Post date:** [November 3, 2021, 1:16am UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/11 "2021-11-03T01:16:58Z")

</div>

You might want to consider these 2 articles by Rusty Burlew. She is a master beekeeper, a bit north of you up the coast:

> **[How to make a moisture quilt for a Langstroth hive](https://www.honeybeesuite.com/how-to-make-a-moisture-quilt-for-a-langstroth-hive/)**
>
> Warm moist air inside the hive raises to the top, condenses on the inner cover, and then drops onto the moisture quilt where it is absorbed by wood chips.

> **[Tweaking my moisture quilts](https://www.honeybeesuite.com/tweaking-my-moisture-quilts/)**
>
> I've been tweaking my moisture quilts by replacing the canvas with hardware cloth. The wire mesh keeps the bees from chewing holes through the quilt bottom.

I think that @Eva uses some kind of moisture control too. Just a thought for you, and while it isn’t really easy, it isn’t that hard either. 😊

---

<div class="post-metadata">

**Author:** ![Greshambeekeeper](https://avatars.discourse-cdn.com/v4/letter/g/ea666f/32.png) [@Greshambeekeeper](https://forum.honeyflow.com/u/Greshambeekeeper)\
**Post date:** [November 3, 2021, 2:57am UTC](https://forum.honeyflow.com/t/i-am-new-on-this-forum/31317/12 "2021-11-03T02:57:51Z")

</div>

Great suggestion. As a wood turner I have lots of shavings and I just got some hardware cloth. This is so helpful. Thanks so much!
