# Langstroth and dadant deeps

**URL:** https://forum.honeyflow.com/t/langstroth-and-dadant-deeps/22308
**Category:** Modifications & Building Bee Hives
**Created:** [July 3, 2019, 2:41pm UTC](https://forum.honeyflow.com/t/langstroth-and-dadant-deeps/22308 "2019-07-03T14:41:36Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![sjw1109](https://avatars.discourse-cdn.com/v4/letter/s/3da27b/32.png) [@sjw1109](https://forum.honeyflow.com/u/sjw1109)
#### Post date: [July 3, 2019, 2:41pm UTC](https://forum.honeyflow.com/t/langstroth-and-dadant-deeps/22308/1 "2019-07-03T14:41:36Z")

</div>

we use langstroth hives, I have someone that has extra dadant deeps. will the dadant work on the langstroth.  
Thank You

---

<div class="post-metadata">

### Author: ![Dawn\_SD](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.honeyflow.com/dawn_sd/32/15954_2.png) [@Dawn\_SD](https://forum.honeyflow.com/u/Dawn_SD)
#### Post date: [July 3, 2019, 4:10pm UTC](https://forum.honeyflow.com/t/langstroth-and-dadant-deeps/22308/2 "2019-07-03T16:10:55Z")

</div>

Hello and welcome to the Flow forum. 😊

I am not sure quite what you are asking.

1. If you want to put Dadant deep frames into a Langstroth box, that probably won’t work. Same with frames from a Langstroth hive into a Dadant deep. The bee space will be wrong under the frames.
2. If you want to put a Langstroth box on top of a Dadant, that does work, but the Dadant is a little wider and you will need to close the gap at the top with a strip of wood. Putting a Dadant on top of a Langstroth is tricky, as you will have an overhang. I suppose you could nail a strip of wood to the bottom of the Dadant box to close up the gap.

I am surprised to hear of Dadant boxes being used in the US, as most people use Langstroth. Dadant in the US does supply Langstroth deeps - are you sure that they are not Langstroths? The Dadant adjustments I mention above are what you would need to do for a Dadant hive as sold in Europe.

I suggest getting a tape measure to help you decide. Personally I don’t like mixing different boxes, even when it is possible. It makes it more complicated keeping 2 different frame sizes, lids and bottom boards, and inspections can be harder, depending on how you normally do them.
