# Waxing flow frames **URL:** \ **Category:** Flow Hive\ **Created:** [November 4, 2019, 7:01am UTC](https://forum.honeyflow.com/t/waxing-flow-frames/23676 "2019-11-04T07:01:27Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![fffffred](https://avatars.discourse-cdn.com/v4/letter/f/71c47a/32.png) [@fffffred](https://forum.honeyflow.com/u/fffffred)\ **Post date:** [November 4, 2019, 7:23am UTC](https://forum.honeyflow.com/t/waxing-flow-frames/23676/2 "2019-11-04T07:23:46Z")
I just mushed a bit of bur comb onto the centre of the frames. Check out the video posted here: > [@Flow frame alignment](https://forum.honeyflow.com/t/flow-frame-alignment/23570/21): > > I just copied what was shown here: I used bur comb found in the brood box and mashed 50 cent piece sized into the centre of the frame on both sides. My thinking is that since bees are a bit OCD, they’ll redistribute around the mashed up bur comb and end up working that area first, then work towards the edges. I too had some concern with the alignment and gaps, but within a month, my ladies had waxed and drawn out the comb and were filling. Welcome and all the best. We look forward to what … --- _[View the full topic](https://forum.honeyflow.com/t/waxing-flow-frames/23676)._